Overview: Custom Measure lets you draw your own distance lines directly on the 3D model in Workspace. You can also enable or disable snapping which helps measurement endpoints automatically align to nearby edges and model geometry, making it easier to get precise, custom line measurements directly on the 3D model while reviewing a property.
You can add multiple measurements at once, keep them visible as you move around the model, and adjust or remove them whenever needed. This makes it easier to double-check distances without breaking your flow.
How to access Custom Measure
You can access Custom Measure in Measurement Mode within Workspace.
From the Project Details Page, Select the Measurements card
Choose the 3D option to open Workspace in Measurements mode
Select the Measure button (ruler) in the action bar
Note: This update is part of a phased release and may not be available to all users yet. If your experience looks different, or you’d like early access, please contact our Support team.
Create a custom measurement
While in Custom Measure mode:
Click on the model to place a starting point
Move your cursor to start a line measurement
Click on the location for your desired endpoint
You can create as many custom measurements as you'd like
The measurement(s) stay visible as you rotate, zoom, or continue reviewing the property. You can also view custom line measurements in 3D mode to see the relevant applied materials.
Snapping custom line measurements
Snapping custom line measurements
As soon as you enter Custom Measure mode, you will notice a toggle for Snapping. When enabled, the endpoint will automatically attach to nearby edges and align with parallel geometry, reducing small placement errors. You can disable snapping any time, if you want more flexibility.
Edit or remove a custom measurement
Click any existing measurement to select it.
Select the edit icon
Drag the endpoints to reposition or resize the measurement
Tap the check icon to confirm your changes and lock the measurement in place
If you no longer need the measurement, select it again and choose the trash icon to delete it from the model.
Custom Measure lets you place and adjust reference distances right on the 3D model, so you can check what you need to without guessing or jumping between tools, and Snapping makes custom measurements even more reliable by keeping them aligned with the model itself—not just where you clicked.
Measurements stay visible as you rotate, zoom, and navigate the model
Multiple custom measurements can be placed and viewed at the same time
Measurements can be edited or removed at any point, reducing rework
Reference distances remain in context instead of being recreated or lost
Having custom measurements right on the model makes it easier to verify distances, avoid rework, and move forward knowing the numbers make sense.