Skip to main content
Import a Hover project into Xactimate

Import an existing Hover project into Xactimate, including the property measurements, 3D models, photos, and digital sketches.

Updated over a week ago

There are two ways that you can utilize the Hover - Xactimate integration to seamlessly pass property data, sketches, and damage photos from Hover into Xactimate. Both workflows are available for Web, Desk, and Mobile.

  1. Start in Hover - Take the photos on site and then import the data into Xactimate.

  2. Start in Xactimate - Initiate a new Hover project from within Xactimate, capture the photos, and then import the data into Xactimate.

    1. This workflow can be used to invite a professional partner or policyholder to take the photos.

This article will cover the "Start in Hover" workflow where you will import an existing Hover project into Xactimate.

Course: Import a Hover project into Xactimate

Take advantage of this short (10 min), interactive walkthrough to learn how to import an existing Hover project into Xactimate.

Before you get started


If you have not already, use this form to enable the integration on your account and have the following available:

  • Verisk Account Number (or Carrier ID)

  • Xactnet Address

  • Default user in your Hover account (email address)

Submitting this form will automatically notify both the Hover and the Verisk Support teams who will complete the setup and configuration for you within 3 business days.

When complete, you will be notified from either Hover Support or your Hover Account Management team.

Click the expand arrows below to reveal more or collapse information.

Steps for Xactimate Desktop (X1)


1. Capture the photos as usual in Hover

  • In this workflow, you will import an existing Hover project into Xactimate.

  • Once you receive the notification that the Hover project is ready, open Xactimate and navigate to the Local Projects page to import the project data and photos.

2. Click the "house icon" and then "New Order" in Xactimate

  • Highlight your project by clicking on it

  • Click the house icon on the right side of the screen

  • A pop-up window titled “Request Data” will appear

    • Select New Order then click Next

You'll be automatically redirected to the Xactimate Data Request website to complete the service request and may need to sign in with your Verisk account credentials.

3. Select the service

Choose the desired service from the provider drop-down list. It should match the deliverable ordered from Hover:

  • Use Roof for Hover roof-only measurements

  • Use Roof & Walls for Hover complete roof and exterior measurements

  • Use Interior Walls for Hover interior floor plans/measurements

4. Confirm the claim information

  • Validate the information for the request is correct

  • Pay close attention to the claim or lead number since that needs to match between Hover and Xactimate for the integration to work successfully

5. Confirm the contact information

  • Validate the contact information for the claim representative and property owner

    • Pro Tip: Ensure your contact information is entered correctly in the claim rep field in your Xactimate preferences (preferences > project > personnel > claim rep). That information will automatically pre-fill later when you request property data.

  • Confirm the primary contact. In this workflow it should reflect your contact information.

  • Click Submit

Once submitted, you will immediately see a notification at the center of your screen that says: "Request Submitted" and the order details will auto populate under the Order History heading on the bottom of the same page.

At this point Xactimate will automatically match your request with a finished Hover job and you are ready to import the Hover data and photos into Xactimate.

6. Click on the "pencil icon" to edit the project

  • From the Local Projects screen, highlight your project by clicking on it.

  • Then click the pencil icon the right side menu.

7. Open the sketch tab and import selected data

  • Under “Estimate” choose the “Sketch” tab and click the import icon (roof sketch image)

  • You’ll see the Hover files available to pull in that matched the requested data for the lead or claim number. Select which records to import.

  • Click Import

Once imported, the plan(s) will be unlocked in Xactimate for editing.

8. View the sketch, photos, and measurement pdf

  • The Hover 2D/3D sketch and measurements will import into your working estimate.

  • See all the imported photos in one place (including damage and annotated photos, if applicable)

  • Go to the the "Documents" tab and then “Reports” for the measurement file(s).

Xactimate Online (XOR)


There are a few difference in how you request data in the Xactimate Desktop and Online versions. There are no differences in how you will import the Hover data.

Review the information below to see the differences in requesting data.

Confirming the request data details

  • Once you click the house icon to request data, a pop up window entitled "Request Data" will appear

  • Choose the desired service from the provider drop-down list:

    • Use Roof for Hover roof-only measurements

    • Use Roof & Walls for Hover complete roof and exterior measurements

    • Use Interior Walls for Hover interior floor plans/measurements

  • Validate the data for the request is correct

    • Pay close attention to the claim or lead number since that needs to match between Hover and Xactimate

    • Click Submit

  • You will immediately see a notification at the bottom of your screen that says: "Your request was processed successfully"

Verisk Support Contact Information:

  • Monday - Friday 7:00 AM - 9:00 PM EST

  • Main Toll-Free #: 1-800-888-4476

Did this answer your question?